FSR® Tank Plus 1/8 Scale 4WD Monster Truck
INTRODUCTION
FSR® has launched its latest monster truck, the Tank 6S RTR 4WD with a 1/8 ratio, featuring FSR's sturdy design and a 6S power speed of over 90 kilometers per hour. It is equipped with a waterproof receiver, waterproof electric adjustment, and waterproof motor, which is not afraid of any road or terrain. It is also very suitable for front wheel off the ground and rear somersault stunts. It comes with a gyroscope receiver, making high-speed turns less likely to roll over, and the remote control distance increases by more than twice - all you need is a lithium battery and charger to drive. Paired with new reinforced molds and metal parts, you can feel an incredibly enjoyable experience!
FEATURES
- Full-time four-wheel drive driving system, strong all-terrain passability.
- High performance 150A,ESC, suitable for 6S power system.
- 4274 2000KV brushless motor, which can provide extremely strong torque and power speed.
- 15KG CNC CNC waterproof servo, with stainless steel gear, large torque and high sensitivity.
- 6061 T6 aluminum alloy chassis, reinforced nylon plastic, center bracket aluminum tube, anti-roll, lubricated.
- High grip and wear-resistant tires.
- PC material body, optimize the aerodynamic appearance design.
- Stable 2.4G radio remote control system.
BODYSHELL
Adopting PC car shell and equipped with front collision mesh.
ROOF
Equipped with anti scratch strips to handle intense rolling.
Front and rear metal frame 5mm thickness.
DIFFERENTIAL MECHANISM
- Metal steel large teeth can provide more stable and high torque output.
- Metal driving teeth and pins are more durable.
- Sealed differential housing with metal planetary gears inside.
- All metal gears, including drive planetary teeth, large teeth, etc., can provide more durable power output.
TRANSMISSION SHAFT
- Steel transmission shaft with a diameter of 4mm.
- The front wheels are designed with CVD.
SHOCK ABSORBER METAL FRAME
- The thickness of the front and rear metal shock absorbers of 6061 T6 is 5 millimeters.
- Thickened metal shock absorbers can prevent deformation and increase durability in high-speed collisions.
MOTOR BASE
- Using 6061 T6 aluminum alloy is lighter and more durable.
- The simple and quick detachable motor base can facilitate the upgrading of the motor for use.
SHOCK ABSORPTION
- All metal adjustable hydraulic shock absorbers have good rebound damping performance.
- The total length of the shock absorber is 130mm, the aperture length is 120mm, the outer diameter of the spring is 20mm, the spring diameter is 1.5mm.
SERVO
- Torque 15kg-6V.
- Strong, metal gears used throughout.
- Waterproof, dustproof case.
- Dimensions: 40x38x20mm.
HOBBYWNIG ESC
- Waterproof, dustproof design.
- 150A, 6S LiPo ready (3S、4S & 6S compatible),Peak 960A.
- A full speed fan can lower the temperature of the electric regulator.
- High Quality 10awg wires.
- Low voltage cut-off and thermal overload protection.
- User programmable start level, brake, voltage protection, reverse speed, and motor timing settings.
HOBBYWNIG BRUSHLESS MOTOR
- 2000Kv 4274 size 6S brushless motor.
- Up to 50000 RPM.
- The combination of black and silver is more fashionable.
- 4-pole construction for smooth, consistent power.
- Super strong 5mm shaft.
- 4mm gold bullet connectors for reliable and efficient connection.
FSR GT15G RADIO RECEIVER
- 4-channel receiver with light controlled gyroscope, （adjustable gyroscope function）.
- Ergonomic steering wheel for precise control.
- 2.4GHz connection built around DSMR technology.
- The maximum input voltage of the receiver is 9V.
- The receiver comes with an enhanced signal line, and the remote control distance can reach 300 meters.
-
Brushless ESCHOBBYWING 150A-6S peak value 950A Lipo RTR with XT90 plug (installed)
-
Brushless motorHOBBYWNIG 4274 2000Kv Brushless Motor (installed)
-
TransmitterFSM Gyroscope 2.4 GHZ Super Response 4-Channel Radio（4-AA battery Without）300 meters (installed)
-
Product size590mm*480mm*250mm
-
Battery Box size160*50mm
-
Shock AbsorberAll metal oil pressure adjustable (installed)
-
TiresФ160*86mm
-
Product weight5.2KG
-
Wheelbase360mm
-
Package ListCar *1， Radio Receiver*1， Screwdriver*1， Tire wrench*1
-
Pinion12T
-
Gear Pitch1M
-
Drivetrain4WD
-
ChassisAluminum alloy 6061 T6 with 3 mm thick,CNC precision machining
-
Servo15KG (installed)
-
Differential Oil10W Front,1W middle, 1W back
-
Final Drive Ratio17.86:1
